V23101D 3B301

Signal Relays AXICOM W11 Relay V23101 n Multi purpose relay size permitting high packing density n 1 form C contact (1 CO, 1 changeover contact) n 200mW and 450mW coils n 1A and 3A contacts n High shock resistance of 30g n Ambient temperature for sensitive version up to 85°C n Immersion cleanable n Small Typical applications Security devices, electric door openers, duplex intercommunication systems, measurement and controls AXICOM AXICOM Approvals Telecom-, Signal and RF Relays UL 508 File No. E 111441 Technical data of approved types on W11 request Relay Contact Data Contact arrangement Contact Data Telecom-, Signal and RF Relays Coil Data 108-98010 Rev. C V23101 1.25A Z 3A Magnetic system Coil voltage range Max. coil temperature Thermal resistance neutral W11 1.5 Relay V23101 to 24VDC 130°C < 125K/W Coil Voltage [U/Unom] 1 form C (CO) Coil Operating Range Max. switching voltage 120VDC, 125VAC Coil versions, monostable Number of contacts and type 1 changeover contacts Rated Rated current 1.25A 3A Coil Operate Limiting Release Coil Rated coil Limiting continuous 1.25A 3A code voltage voltage Voltage voltage resistance power Unom = Contact assembly current, 85°C single contacts 2.6 200 mW coil Switching power 30W, 62.5VA 72W, 360VA VDC VDCmin. VDCmax. VDCmin. Ω±10% mW Umax. = Contact material AgPd, gold plated AgNi 2.4 AgNi, gold plated Contact material AgPd, gold plated AgNi Standard coil, 450mW Umax. at 0 A 2.23 Limiting continuous current at max. ambient temperature 1.25 A A 001 1.5 1.3 2.6 0.15 Umax. at 1.25 6 A 375 AgNi, gold plated Uop. min. = switching current (seeload load limit diagram) A Min.Maximum recommended contact 10mA at 20 mV 1.25 A 002 233 2.1 4.7 0.30 20 450 Maximum swichting voltage 120 Vdc 120 Vdc Minimum switching voltage 100μV 003 3.5 7.9 0.50 56 446 1.8 5 125 Vac 1256 Vac Initial contact resistance 100mΩ at 10mA, 20mV 004 4.2 9.5 0.60 80 450 1.6 Maximumof switching capacity 360 VA Frequency operation, without load max. 20 operations/s 30 W / 62.5 VA 005 72 W / 9 6.3 14.2 0.90 180 450 Urel. min. = 1.4 Thermoelectric potential < 10 µV < 10 µV Operate / release time max. 7ms/5ms 006 12 8.4 19.0 1.20 320 450 1.2 mΩ Initial contact resistance / measuring condition: 10 mA / 20 mV 100 mΩ 100 Bounce time max., form A/form B 2/10ms 007 24 16.8 38.0 2.40 1280 450 1 U200mW nom. nominal coil voltage Electrical endurance Electrical endurance, Sensitive coil, 5 standard: version at 24 Vdc / 1.25 A min. 3 x 10 operations 101 1.5 1.1 3.6 0.15 12 188 standard 0.8 min. 2 x 105 operations at 24 Vdc / 3 A 5 at 24VDC / 1.25A 102 0.6 3 2.3 7.1 0.30 45 200 min. 1.5 x 105 operations at 120 Vac / 1.25 A min. 3x10 ops. Uop. min. at 24VDC / 3A min. 2x105 ops. 103 min. 4 x0.4 11.6 0.50 120 208 1055 operations 3.8 at 120 Vac / 3 A Urel. min. at 120VAC / 1.25A min. 1.5x105 ops. 104 6 4.5 14.2 0.60 180 200 0.2 5 operations at 24 Vdc / 1.25 A 2 x 510ops. sensitive: at 120VAC / 3A min.min. 4x10 105 9 6.8 21.2 0.90 400 203 min. 1 x 10 24 Vdc / 3 A 0 5 operations sensitive version at 106 12 9.0 28.0 1.20 700 206 5 min. 1 x 10 operations at 120 Vac / 1.25 A -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 at 24VDC / 1.25A min. 2x105 ops. 107 min. 3 x 1024 18.0 Ambient56.0 2800 206 5 operations at 120 Vac / 3 A Temperature 2.40 [°C] at 24VDC / 3A min. 1x105 ops. 108 18 13.5 33.0 1.80 1620 200 All figures are given for coil without pre-energization, at ambient temperature +23°C. endurance, typ 107 operations Mechanical at 120VAC / 1.25A min. 1x105 ops. at 120VAC / 3A min. 3x105 ops 2.6 450 mW coil Mechanical endurance typ. 10x106 operations Max. DC Load Breaking Capacity 2.4 Umax. at 0 A Umax. at 1.25 A 2.2 Max. DC load breaking capacity DC Voltage [Vdc] Coil Voltage [U/Unom] 2.0 1.8 1.6 1.4 1.2 Unom. nominal coil voltage 1.0 0.8 Uop. min. Urel. min. 0.6 0.4 0.2 0.0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature [°C] DC current [A] 07-2015, Rev. 0715 Datasheets and product specification www.te.com according to IEC 61810-1 and to be used © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. a TEAllConnectivity company specificationsLtd. subject to change. Consult Tyco Electronics for latest specifications. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 10 of 13 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 AXICOM Signal Relays Telecom-, Signal and RF Relays 108-98010 Rev. C AXICOM W11 Relay V23101 W11 Relay V23101 (Continued) Coil Operating Range Coil Data (continued) Insulation Data 2.6 UnomInitial = dielectric Nominal coil voltage strength open limit contacts Umax. =between Upper of the operative range of 750Vrms between contact and coil 1000Vrms the coil voltage (limiting voltage) Initial =insulation at operative 500VDC range of the > 109Ω Uop. min. Lowerresistance limit of the Capacitance coil voltage (reliable operate voltage) between open contacts For latching relays Uset min. resp. Uresetmax. min. 2pF between contact and Urel. min. = Lower limit of coil the operative range of max. 10pF the coil voltage (reliable release voltage) 200 mW coil 2.4 Umax. at 0 A Umax. at 1.25 A 2.2 Coil Voltage [U/Unom] 2 1.8 1.6 1.4 1.2 1 Other Data Unom. nominal coil voltage W H T Coil Voltage [U/Unom] Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at 0.6 Telecom-, Signal 108-98010 Rev. C Signal and RF Relays and RF Relays www.te.com/customersupport/rohssupportcenter 108-98010 Rev. C Uop. Telecom-, min. AXICOM AXICOM Ambient temperature -40 to +85°C Urel. min. 0.4 Telecom-, Signal Telecom-, and RF Relays Signal andW11 RF Relays 108-98010 Rev. 108-98010 C Rev. C W11 Relay Category V23101 of environmental protection Relay V23101 0.2 IEC 61810 RT III - wash tight 0 Relay V23101 Vibration resistance (functional) 10g, 10 to 200Hz -40 -30 -20 -10 0 10W11 20 30 Relay 40 W11 50 60 V23101 70 80 90 100 Ambient Temperature [°C] Shock resistance (functional) Terminal assignment Terminal assignment IEC 60068-2-27 (half sine) 30g Coil operative range graphs Shock resistance (destructive) 100g Dimensions Dimensions DimensionsDimensions in mm inPCB-THT mm Relay – top view Unom Nominal coil voltage Relay – top view Terminal type 2.6 450 mW coil Umax Upper limit of the operative range of the coil voltage (limiting Weight max. 4g 2.4 voltage) when coils are continously energized Resistance to soldering heat THT V23101-D1 xxx-Axxx 2.2 V23101-D1 xxx-Axxx THT THT V23101-D0 xxx-Axxx U max. at 0 A V23101-D0 xxx-Axxx Uop. min. Lower limit of the operative range of IEC 60068-2-20 265°C/10s Umax. at 1.25 A V23101-Dxxx-Xxxx V23101-Dxxx-Xxxx the coil operate voltage) 2.0 voltage (reliable Ultrasonic cleaning not 6 pin version with symmetrical coil assignment 5 pin version with symmetrical coil assignment Urel. min. Lower limit of the 6 pin range version coil assignment 5 pin version with symmetrical coil recommended assignment mmoperative mm of with symmetrical inch inch 1.8 Packaging/unit tube/25 pcs. the coil voltage (reliable release voltage) L 15.5 ± 0.1 15.5 ± 0.1 0.610 ± 0.004 0.610 ± 0.004 1.6 L box/625 pcs. AXICOMAXICOM 0.8 1.4 1.2 1.0 W 10.5 ± 0.1 10.5AXICOM ± 0.1 0.413 ± 0.004 0.413 ± 0.004 AXICOM Signal RF Relays Telecom-, and RF Relays H 11.5 - 0.2 Signal 11.5Telecom-, - 0.2 0.453and - 0.008 0.453 - 0.008 coil voltage TUnom. nominal 3.5 - 0.2 3.5 - 0.2 0.138 - 0.008 0.138 - 0.008 108-98010 Rev. C 108-98010 Rev. C W11V23101 Relay V23101 W11 Relay 0.8 Uop. min. Urel. min. 0.6 THT Version THT Version assignment erminal Terminal assignment 0.4 0.2 15.5±0.1 15.5±0.1 10.5±0.1 10.5±0.1 – top view elay – top Relay view -40 -30 -20 -10 0 10 20 30 40 50 60 Terminal assignment [°C] TOP view on component Ambient side of Temperature PCB 0.0 80 90 100 V23101-D0 xxx-Bxxx V23101-D1 V23101-D1 xxx-Axxx xxx-Axxx V23101-D0 xxx-Bxxx 11.5-0.2 11.5-0.2 23101-D0 V23101-D0 xxx-Axxx xxx-Axxx 70 V23101-D1 xxx-Bxxx V23101-D1 xxx-Bxxx 3.5-0.2 3.5-0.2 6 pin version with symmetrical 5 pin version with symmetrical 5 pin version with asymmetrical 6 pin version with asymmetrical coil assignment assignment coil assignment 6with pin asymmetrical version with asymmetrical assignment 5with pin asymmetrical version withcoil asymmetrical coil assignment 6 pin version coil assignment 5 pin version coil assignment pin version with symmetrical coil assignment 5 with pin coil version with coil symmetrical coil assignment pin version6 with symmetrical coil assignment 5 pin version symmetrical coilassignment assignment V23101-D0xxx-Axxx V23101-D1xxx-Axxx V23101-D1xxx-Bxxx V23101-D0xxx-Bxxx Mounting Mounting hole layout hole layout View onto the View component onto the component side of the side PCBof(top theview) PCB (top view) xxx-Bxxx 23101-D0 V23101-D0 xxx-Bxxx PCB layout TOP view on component Version: 6 pins Version: 6 pins side of PCB pin version with asymmetrical coil assignment pin version6 with asymmetrical coil assignment 6 pin version V23101-D1 V23101-D1 xxx-Bxxx xxx-Bxxx Version: 5 pins Version: (without 5 pinspin (without no. 6) pin no. 6) pin version with asymmetrical coil assignment 5 pin version5 with asymmetrical coil assignment 5 pin version 8 of 13 All specifications subject to change. Consult Tyco Electronics for latest specifications. 2 07-2015, Rev. 0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. Needle flame test application tim Mounting position Processing information Weight (mass) Signal Relays Terminal coating Resistance to soldering heat Ultrasonic cle AXICOM W11 Relay V23101 (Continued) Packing Dimensions Tub 25 625 Packing All specifications subject to change. Consult Tyco Electronics for latest specifications. Product code structure Typical product code V23101 D0 104 B 401 Type V23101 W11 Series Signal Relay Pinning D0 6 pin vetrsion (standard) D1 5-pin version (without pin no. 6) Coil Coil code: please refer to coil versions table Coil terminal assignment A Symmetrical coil assignment B Asymmetrical coil assignment Contacts 201 1 form C (CO), AgPd, gold plated 301 1 form C (CO), AgNi 401 1 form C (CO), AgNi, gold plated 07-2015, Rev. 0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3 Signal Relays AXICOM W11 Relay V23101 (Continued) Product Code Pinning Coil Coil voltage Coil assignment Cont.material 23101-D0001-A201 V 6 pins Standard 1.5VDC Symmetrical AgPd, Au plated V23101-D0002-A201 version coil 3VDC V23101-D0003-A201 5VDC V23101-D0004-A201 6VDC V23101-D0005-A201 9VDC V23101-D0006-A201 12VDC V23101-D0007-A201 24VDC V23101-D0001-B201 1.5VDC Asymmetrical V23101-D0002-B201 3VDC V23101-D0003-B201 5VDC V23101-D0004-B201 6VDC V23101-D0005-B201 9VDC V23101-D0006-B201 12VDC V23101-D0007-B201 24VDC V23101-D0006-A301 12VDC Symmetrical AgNi V23101-D0003-B301 5VDC Asymmetrical V23101-D0006-B301 12VDC V23101-D0007-B301 24VDC V23101-D0003-A401 5VDC Symmetrical AgNi, Au plated V23101-D0006-A401 12VDC V23101-D0007-A401 24VDC V23101-D0006-B401 12VDC Asymmetrical V23101-D0007-B401 24VDC V23101-D1006-A201 5 pins 12VDC Symmetrical AgPd, Au plated V23101-D1003-B201 5VDC Asymmetrical V23101-D1006-B201 12VDC V23101-D1007-B201 24VDC V23101-D1006-A401 12VDC Symmetrical AgNi, Au plated V23101-D1006-B401 Asymmetrical V23101-D0101-A201 6 pins Sensitive 1.5VDC Symmetrical AgPd, Au plated V23101-D0102-A201 version coil 3VDC V23101-D0103-A201 5VDC V23101-D0104-A201 6VDC V23101-D0105-A201 9VDC V23101-D0106-A201 12VDC V23101-D0107-A201 24VDC V23101-D0108-A201 18VDC V23101-D0101-B201 1.5VDC Asymmetrical V23101-D0102-B201 3VDC V23101-D0103-B201 5VDC V23101-D0104-B201 6VDC V23101-D0105-B201 9VDC V23101-D0106-B201 12VDC V23101-D0107-B201 24VDC V23101-D0106-A301 12VDC Symmetrical AgNi V23101-D0107-A301 24VDC V23101-D0106-B301 12VDC Asymmetrical V23101-D0103-A401 5VDC Symmetrical AgNi, Au plated V23101-D0106-A401 12VDC V23101-D0107-A401 24VDC V23101-D0108-A401 18VDC V23101-D0107-B401 24VDC Asymmetrical V23101-D1106-A201 5 pins 12VDC Symmetrical AgPd, Au plated V23101-D1107-A201 24VDC V23101-D1106-B201 12VDC Asymmetrical V23101-D1107-B201 24VDC V23101-D1106-B301 12VDC AgNi V23101-D1106-A401 Symmetrical AgNi, Au plated V23101-D1106-B401 Asymmetrical 4 07-2015, Rev. 0715 www.te.com © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 1393779-1 1393779-3 1393779-5 1393779-8 1-1393779-1 1-1393779-3 1-1393779-8 1393779-2 1393779-4 1393779-6 1-1393779-0 1-1393779-2 1-1393779-6 2-1393779-0 4-1419172-4 1393779-7 1-1393779-7 2-1393779-1 1422028-2 1422028-3 1422028-5 1422028-4 1422028-6 4-1393779-1 4-1393779-0 4-1393779-2 1413012-1 1-1422028-2 1-1422028-3 2-1393779-2 2-1393779-4 2-1393779-6 2-1393779-8 3-1393779-0 3-1393779-2 3-1393779-5 3-1393779-9 2-1393779-3 2-1393779-5 2-1393779-7 2-1393779-9 3-1393779-1 3-1393779-3 3-1393779-8 1422037-2 3-1393779-7 3-1393779-4 1422028-7 1422028-8 1422028-9 1-1422028-1 1-1422028-0 4-1393779-3 4-1393779-6 4-1393779-4 4-1393779-7 4-1393779-5 1-1422028-4 1-1422028-5 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.